Operation; Intended Use - Fieldmann FZG 9001-E Instrucciones De Uso

EN 8 Important safety instructions | Operation
For using the unit, we recommend the use of an RCD with a residual current < 30 mA. In
Switzerland the utilisation of an RCD is obligatory. Ask your installation technician for advice
in this matter.
First allow the barbeque lighter to cool down completely before cleaning, storing or when not
in use.
Allow the charcoal to cool down completely before you dispose of the coal/the ashes.
Clean the barbeque lighter after each use.
Never pull the power cord, but always use the power plug to unplug the unit. The barbeque
lighter is only switched off when it is unplugged.
If the device, the power cord or the plug exhibit visible damages, the device may not be used
any further. Have it repaired by a qualified workshop.
Do not disassemble the device and do not try to repair it yourself. The device does not contain
any parts serviceable by you. In case of questions or problems turn to our customer service.
Always also pay attention to the safety notes provided by the manufacturer of the barbeque
being used.

4. OPERATION

Intended Use

This product is design for starting barbecue charcoal and briquettes. The product is designed
for private, not for commercial use. Only use the product with charcoal barbeques and not
with gas or electric barbeques. Use it only as described in the instructions.
The intended use also includes an operation following the operating instructions.
Any use beyond these parameters (different media, applying force) or any changes
(reconstruction, no original accessory) can lead to serious risks and is regarded as use that
is contrary to the intended purpose.
Using
WARNING! Children are not allowed to operate with the barbecue lighter
WARNING! Make sure that the barbecue lighter is in proper position.
. Put the barbeque on a stable, horizontal and heat resistant surface. Cover the bottom of the
barbeque with a layer of charcoal or briquettes.
Place the heating element (1) of the barbeque lighter on this layer. Ensure that the handle (3)
is situated on the outside of the barbeque.
Now stack several pieces of charcoal or briquettes in the shape of a pyramid on the heating
element of the barbeque lighter.
Double check the proper position of the barbeque lighter and the power cord.
Connect the barbeque lighter to an earthed contact socket earthed according to regulations
(230 V~ 50 Hz).
FZG 9001-E