EnglisH
10
All manuals and user guides at all-guides.com
level is too low. When the fluid level drops below
the minimum level, the cleaning light flashes with
intervals and the holder returns to its starting
position.
If you use the washing machine to clean the shaver
every day, refill the cleaning chamber approx. every
15 days.
1
Simultaneously press the release buttons on
both sides of the cleaning chamber (1) and lift
the washing machine off the cleaning chamber
(2).
The cleaning chamber remains behind.
2
Unscrew the dosing cap from the bottle with
HQ200 Cleaning Fluid and remove the airtight
seal.
3
Fill the cleaning chamber with cleaning fluid up
to the MAX indication.
4
Place the washing machine back onto the
cleaning chamber.
Make sure the release buttons snap back into place.
5
Put the appliance plug in the washing machine
and put the powerplug in the wall socket.
The holder automatically moves to the highest
position.
The washing machine is now ready for use.
Using the washing machine
1
Place the shaver in the holder and push the
lever down completely to lock the shaver into
place.
The charging light on the washing machine flashes to
indicate that the shaver is being charged.