airnet AIR-AP54GH Guia De Inicio Rapido página 3

Please use only wired network connections to configure the AP.
Note
Turn off all your network
devices, including your
computer(s),
injector and the AP.
Connect your computer
to the LAN port on the
power injector with an
Ethernet cable.
Plug the provided power
adapter into the DC jack
on the power injector,
and the other end to a
standard electrical wall
socket.
Connect your AP to the
PoE port on the power
injector with an Ethernet
cable.
The power adapter can be directly connected to the AP too. In this way
Note
you can connect your computer directly to the AP with an Ethernet cable.
All manuals and user guides at all-guides.com
power
1