airnet AIR-AP54GH Guia De Inicio Rapido página 8

Click Finish to exit the Quick
Setup wizard and wait until the
AP completes
automatically. The changes will
take effect after rebooting.
Click Finish
After successfully logging in, configure the other AIR-AP54GH by following the steps
below.
2) The Client Setting
You should change the default LAN IP address of the Client from
Note
192.168.1.1 to 192.168.1.X (X can be any number from 1 to 253) to avoid
an IP conflict with the former AP. Here we choose 192.168.1.2 as an
example.
Click Network
Enter 192.168.1.2
in the IP Address
field.
Click Save
Note The AP will begin rebooting automatically after clicking Save.
Click Wireless > Wireless
Mode
Select Client
Enter AIRNET_975808, the
SSID of the first AP you
Click Save at the bottom of this page.
All manuals and user guides at all-guides.com
rebooting
6