airnet AIR-AP54GH Guia De Inicio Rapido página 4

Turn on all your network devices and then check to see if the LEDs on the AP
display normally as the diagram below describes.
Solid light
Flashing
Solid light or flashing
Flashing if the Wireless Radio
function is enabled
If the LEDs display abnormally, please check to see if all the cable
Note
connectors (power adapter and Ethernet cable) are well connected to your
device.
You will need to assign your computer a Static IP address within the
Note
same range as the AP's IP address. See the Troubleshooting T3 if you
need assistance.
Login
Open your web browser
and type in 192.168.1.254
in the address bar and
press Enter.
All manuals and user guides at all-guides.com
2