Switching On/Off - ENERGY SISTEM ENERGY F7020 Manual De Usuario

SWITCHING ON / OFF
≥
To power on your Energy™ F7020 digital photo frame just plug
in the provided power adaptor to a 220/240V AC source and
press the ON/OFF button located on the back side of the frame
for a few seconds. Right then, the photo frame will automatically
detect if there is any memory card inserted in the memory slot or
if there is any USB device plugged in the USB Host input of the
frame. Important: Do not remove the memory card or USB device
when it is being accessed to avoid data losses.
To turn off your photo frame, simply press the ON/OFF button on
the back side of the frame for a few seconds. To leave the device
in Standby mode, press the STANDBY ON/OFF button on the
remote control. To activate the digital photo frame again, press
the STANDBY ON/OFF button on the remote control or the ON/OFF
button on the back side of the digital photo frame.
Note: Please be aware that the alarm clock can only be activated
when the digital photo frame is turned ON or in Standby mode.
In case you turn OFF the device using the ON/OFF button on the
backside of the frame, or the electric adaptor is unplugged from
the socket, the alarm will never start beeping.
All manuals and user guides at all-guides.com
43