All manuals and user guides at all-guides.com
Note: When you change the automatic image adjustment,
the selected mode will persist for the following pictures until
changed again, until switching off the photo frame or until the
power adaptor is disconnected from the electrical socket. When
powered back on, the default mode "Pan & Scan" will be used
again.
Transition effect: This option allows choosing the type of
effect desired during the transition between pictures when the
slide show mode is activated. There are several effects available.
In addition, it is possible to alternate between all of them
choosing the "random" option.
Slide show speed: From this option it is possible to choose
the time each picture will be shown in the slide show mode
before changing to the next picture. You can choose 5/15/30/60
seconds or 5/10/30/60 minutes.
Split screen: Activating this option, the display will be divided
into 4 areas during the slide show; therefore up to 4 independent
pictures could be displayed at the same time.
48