2. Press ▼ to select the internal memory or removable media.
3. Press ◄/► to select Photo mode and press ENTER.
4. Press COPY/DEL. The screen will display COPY/DELETE/SORT. Press ◄/► to select SORT
and press ENTER.
5. Press ▼ to select 6 PIC, 12 PIC or 30 PIC to display 6, 12 or 30 thumbnails and press ENTER
to confirm.
®
IV.
WI-FI
To enjoy the provided web services, such as Picasa™, Flickr
up for a new account for the web service you want to use on the Internet. Before first time using the Wi-
Fi function of the photo frame, follow the steps below to set up the Wi-Fi
required account configurations, so that you can use the available web services in Wi-Fi List.
1. Wi-Fi Setup
Press EXIT on your remote as many times as necessary for the media selection screen to come up.
Press ◄/► to select Wi-Fi and press ENTER.
Press ► to highlight Wi-Fi Setup and press ENTER to enter the submenu.
Navigate with ▲/▼ in the Wi-Fi Setup submenu.
1.1 If you are using automatic IP network
- Select DHCP for automatic connection in the Wi-Fi Setup submenu.
- The Select Access Point screen appears and shows access points that are available nearby.
- Use the ▲/▼ to select an access point you want to connect to, and then press ENTER.
1. After successful connection to an open access point with no password (security-disabled
network) "Your Connection is successful" will be displayed.
2. To connect to a password-protected access point (security-enabled network), you will be
prompted to enter the password in the Keyboard screen that appears.
Enter the password in the Key field. When finished, select Done, and then press ENTER.
After entering the correct password "Your Connection is successful" will be displayed.
If you enter a wrong password "Connection failure Please try again " will be displayed.
- Once the connection is established, the icon
screen. The IP address, Gateway, DNS server and MAC address will be shown at the bottom
of the screen.
- When you have set up Wi-Fi
Wi-Fi network automatically every time it is powered on.
Tips: On-screen keyboard use
- Press the ◄/►/▲/▼ to select an item, press ENTER to confirm.
- Select shift and press ENTER to toggle between uppercase and lowercase.
- Select Backspace and press ENTER to cancel your input.
- Select space and press ENTER to input a space.
- To go to the next field or move among fields, select Done and then press ENTER.
8
Non contractual document subject to change in case of typographical errors (Mktg0810)
The manufacturer reserves the right to modify the product specifications without notice.
All manuals and user guides at all-guides.com
®
connection using DHCP, the photo frame will connect to the
®
from the photo frame, you need to sign
®
connection and make the
will be flashing in the top right corner of the
COPYRIGHT SOPEG 2010