Turning On The Mass Storage Mode - Elmo QBiC MS-1 Guía De Puesta En Marcha

All manuals and user guides at all-guides.com
(Use the HDMI cable with micro D connector.)
3. Press and hold (over 1second) the [Power Switch]
to power on the camera. When the camera is
powered on, the Live view is displayed on a TV or
projector screen.
4. Press the [Power Switch] and the camera enters
the Playback mode.
5. Select the photo file or movie file to be played from
the thumbnail list with the [Power Switch].
6. Press the [Recording Switch] to play the selected
file.
7. Select the Thumbnail mode after the playback of
the file is finished. Then press the Recording Switch
to return to the Thumbnail mode.
(Refer to the QBiC MS-1 INSTRUCTION MANUAL for detail.)
VIEWING RECORDED FILES ON SMART
PHONE
With the [QBiC App] available from [App Store] or
[Play Store] you can play recorded photo files and
movie files on your smart phone.
(Refer to the QBiC MS-1 INSTRUCTION MANUAL for detail.)
MASS STORAGE MODE
This camera can be used as a storage device.
Using this mode, you can transfer the data stored
in the micro SD card to your computer.

TURNING ON THE MASS STORAGE MODE

1. Open the Interface Terminal Cover.
15