Magneti Marelli 007950006900 Manual Del Usuario página 9

BAD CELL & REPLACE
*The battery has at least one cell short circuit. It
should be replaced immediately.
LOAD ERROR
*The tested battery is bigger than
2000CCA/SAE or 200AH. Or the clamps are
not connected properly. Please fully charge the
battery and retest after excluding both previous
reasons. If reading is the same, the battery
should be replaced immediately.
14.SOC & SOH Display: Press directional keys to see SOC & SOH:
GOOD & PASS
SOC:
15.Test Code:
Press <Enter> to get Test Code.
www.diagtools.eu, Pernavas 43A, Riga, Latvia, LV-1009, +37129416069, info@diagtools.eu
xx.xx V
90%
BAD CELL &
REPLACE
VOL:
CCA:
IR:
LOAD ERROR
GOOD & PASS
SOH:
xxxxxxxxxxxx
9
xx.xx V
xxxx CCA/SAE
xxxx CCA/SAE
90%
CODE