3. Place vacuum insert inside of trash bag. Secure
insert using attached hook and loop material.
(See Figure 3)
NOTE: Insert is designed to keep trash bag in
place while vacuum is operating.
Figure 3
4. Slide steel ring inside of insert. (See Figure 4)
Figure 4
WHEN UNIT IS FULL
1.
Remove vacuum motor, making sure to protect filter.
2. Remove rigid trash can insert along with steel ring.
3. Remove bag full of peanuts and replace with new
trash bag.
PAGE 2 OF 6
ASSEMBLY CONTINUED
5. Place vacuum motor on top of trash can.
Make sure to protect the filter from damage.
(See Figure 5)
MAINTENANCE
1-800-295-5510
uline.com
Figure 5
NOTE: Clean filter periodically by vacuuming
dust that has collected.
0721 IH-1610