osann Marty Isofix Manual página 16

EN
INSTALLATION OF THE CHILD CAR SEAT
Group 2/3 (forward-facing)
(For children weighing 15–36 kg)
1. Fold the Isofix connectors out 180°.
2. Guide the Isofix connectors to the Isofix connector pieces on the seat of the vehicle and
ensure that they lock in position. Please ensure that both Isofix indicators are showing green.
3. Now thread the diagonal belt through the car's 3-point belt guide on the
head support of the child car seat.
4. Put your child in the child car seat.
5. Adjust the height of the head support so that the child's head is completely positioned in
the head support and the diagonal belt exits the belt guide at the child's shoulder height.
6. Thread the diagonal belt and the lap belt underneath the armrest and close the belt
buckle of the car's 3-point belt again until you hear a click.
7. Pull the diagonal strap to tighten it. Ensure that the straps are not twisted.
Installation without Isofix:
Alternatively, the child car seat can also be installed in group 2/3 with just the 3-point belt.
Connecting the seat with the Isofix connectors is not absolutely essential but is recommended.
- 16 -
CLICK