osann Marty Isofix Manual página 62

EN
KLIMAX TECHNOLOGY
As soon as the plug is inserted into the 12 V on-board power socket in your car and switched on
using the red button, the system is ready for use.
The Klimax technology activates only when pressure is applied to the sensor in the seat.
ATTENTION: Use the child car seat only for transporting your child. Never use it to transport
items that could activate the Klimax technology when the system is switched on.
The Klimax technology is fully automated. You do not need to adjust any settings other than
switch on the system (as described above).
SUMMER COOLING
The integrated sensor measures the temperature inside the child car seat. If this temperature is
above 30°C, the system is activated and removes the warm air, creating a cooling air circulation
eff ect.
WINTER WARMING
When the integrated sensor measures a temperature of less than 5°C, however, the seat area is
automatically heated until the inside of the seat has reached a temperature of 20°C.
DISPLAY
The display shows you the measured temperature inside the child car seat in degrees Celsius
(°C). The function currently active is also displayed: Ventilation or heating.
Temperature
Ventilation
Heating
CLEANING
You can clean the child car seat cover according to the washing instructions on the washing
label, which is located on the cover itself.
Use a damp cloth to clean the plastic body. Thoroughly dry the cleaned areas to ensure that
no moisture can damage the electronics. Do not use chemicals or abrasive cleaning agents.
- 18 -
OSANN