EKS 0315 Guia De Inicio Rapido página 3

All manuals and user guides at all-guides.com
Cuff holder
QUICK START GUIDE
Avoid smoking, eating or exercising for 30 minutes
before making a measurement.
1. Sit upright in a chair with your both feet on the floor.
2. Remove tight fitting or thick clothing from you
upper arm.
3. Pull on the end of the cuff until it wraps securely
around your upper arm. Place your arm on a table
so that your wrist is at the same level as your heart.
4. Press the "POWER" button. Then press the "START" button.
The cuff will automatically inflate and the
measurement will start.
5. When the measurement is complete, the cuff will
automatically deflate and your systolic and diastolic
pressure values and pulse rate will be displayed.
DATE and TIME SETTINGS
- Set the correct date and time before making a measurement.
- Date and time should be reset after replacing batteries.
1. Press and hold the "TIME" button for a few seconds until the "Year" digit flashes.
2. Press the"memo s" or "paget" buttons to select the current year.
3. Press the "TIME" button to confirm the year setting.
4. Follow the same steps to set the month, day, hour and minute.
Start
memo s
TIME
Power

paget