New unit
Bad / strange smell
Dirty water or the
water has extended its
storage period.
Stain built up on the
transducer
Dirty water or the
water has extended its
Low mist output
storage period.
The water is too cold
Lack of water
Abnormal noise
Placed on an
unstable surface
Water doesn't go
Blocked by the lter
down to the sink
Gap between the
water tank and the
Mist over ows from the
base or gap between
tank or around the
the nozzle and the
nozzle
tank
All manuals and user guides at all-guides.com
Remove the water
tank and unscrew the
water tank cap. Put it
in a room without any
operation for at least
half an hour
Clean the water tank,
re ll with clean water
Clean the transducer
Clean the water tank,
change to fresh and
clean water
Add some warm
water inside
Fill the water tank with
water
Move the unit to a
stable at surface
Clean the lter
Put some water
around the surface of
the water sink.
Wet the nozzle before
using.
The unit is placed on
tilted surface
The water tank is not
The water tank leaks
correctly installed in
the unit.
The water tank cap is
not tightly closed
Warranty
TaoTronics products are covered by a 12 month limited warranty from the
date of its original purchase. If any problems occur, please contact our
support team.
We can only provide after sales service for products that are sold by
TaoTronics or TaoTronics authorized retailers and distributors. If you have
purchased your unit from a different place, please contact your seller for
return and warranty issues.
Support
Email: support@taotronics.com
Tel: 1-888-456-8468 ext: 4 (Mon to Fri, 8 am to 5 pm, PST)
Website: www.taotronics.com
Place the unit on a at
surface
Install the unit as
instructed by this User
Guide
Tightly close the tank
cap
Please do not
separate water tank
from the base when
the unit is working
07/08