Mute Function; Software Version - Sangean DDR-36 Instrucciones De Manejo

Mute function

Press the Mute button on the remote control of your radio, it will mute the output from the
loudspeakers.
. Press the Mute button to mute the sound output. The speaker volume symbol on the display
will disappear.
. Press the Mute button again or one of the Volume buttons to un-mute the sound output.

Software version

The software display cannot be altered and is just for your reference.
. Press the Standby button to switch on your radio.
. Press the Menu button until the Advanced menu shows on the display.
. Rotate the Tuning control until 'System Setting' appears on the display. Press and release the
Select button.
4. Rotate the Tuning control until 'SW Version' appears on the display.
5. Press and release the Select button. The software version shows on the display.
6. Press and release the Menu button to exit the software version display.
7
All manuals and user guides at all-guides.com
DAB
<System Setting
System Setting
<SW Version
SW Version
dab-mmi-FS2052-0000-
>
>