System Reset - Sangean DDR-36 Instrucciones De Manejo

System reset

If your radio fails to operate correctly, or some digits on the display are missing or incomplete
carry out the following procedure.
. Press the Standby button to switch on your radio.
. Press the Menu button until the Advanced menu shows on the display and then release the
button.
. Rotate the Tuning control until 'System Setting' appears on the display. Press and release the
Select button.
4. Rotate the Tuning control until 'Factory Reset' appears on the display. Press and release the
Select button.
5. Rotate the Tuning control until 'Yes' is highlighted on the display. If you do not wish to carry out
a system reset, highlight 'No' and then press the Select button. The display will revert back to
the previous display.
6. With 'Yes' highlighted, press and release the Select button. A full reset will be performed. The
station list and presets will be erased. Alarms will be cancelled and sleep timer settings will be
set to their default values. The display will show 'Welcome to Digital Radio' and the unit will
behave as when first switched on.
In case of malfunction due to electrostatic discharge, reset the product (reconnection of power
source may be required) to resume normal operation.
9
All manuals and user guides at all-guides.com
DAB
<System Setting
System Setting
<Factory Reset
Factory Reset?
No <Yes>
>
>