Cleaning And Maintenance - Mx Onda MX-BB2500 Manual De Instrucciones

Hand blender
The hand mixer is ideal for preparing sauces, creams, soups, mayonnaise,
purees, porridges, smoothies or for mixing foods.
Once the removable foot is attached to the motor assembly as described in the
Removable foot assembly and disassembly section, follow these steps:
1. Pour the ingredients into a suitable container.
2. Put the hand mixer into the bowl.
3. Plug the appliance into a mains socket and press button A to start the
motor. Depending on the pressure exerted on this button, you can select
the desired speed. It is recommended to use the appliance discontinuously,
that is, at intervals. With this you will obtain a better quality in the
preparation of food and a lower effort of the engine.
4. To avoid splashing during the process, the mixer must remain upright.
5. Do not leave the mixer immobile, make circular movements and gently.
6. Before removing the mixer from the container, stop the motor and unplug it
from the mains socket.

CLEANING AND MAINTENANCE

To avoid the danger of electrocution, before cleaning the appliance,
disconnect it from the mains.
The blades of the mixer foot should be cleaned by pouring soapy water into
a suitable container and making them work as if they were normal use.
Then clarify all the elements.
Do not put the detachable foot in the dishwasher.
Do not immerse the motor set in water or any other liquid, clean it only with
a damp cloth and do not use abrasive products.
7