Tuner Operation; Local Seek Tuning; Best Stations Memory (Bsm) - Pioneer KEH-1960 Manual Del Usuario

Tuner Operation

Local Seek Tuning

This function selects only stations with especially strong signals. The sensitivity can be
adjusted in 4 steps for FM and 2 steps for MW/LW.
1. Switch the Local ON or OFF
with the LOCAL button.
2. Enter the Local Seek
sensitivity selecting mode by
pressing the LOCAL button
for 2 seconds.
3. Select the desired Local Seek
sensitivity with the 2/3
buttons.
: L-1 += L-2 += L-3 += L-4
FM
MW/LW : L-1 += L-2
Note:
• The L-4 setting allows reception of only the strongest stations, while lower settings let you receive
progressively weaker stations.
• The Local Seek Level is indicated in the display for about 5 seconds.
• After selecting the Local Seek sensitivity if you do not perform an operation for more than 5
seconds, the Local Seek sensitivity selecting mode is automatically canceled.
• When you cancel the Local Seek sensitivity selecting mode, press the LOCAL button.

Best Stations Memory (BSM)

The BSM function stores stations in memory automatically.
• Press the BSM button for 2
seconds to switch BSM ON.
The stations with the strongest
signals will be stored under buttons
1–6 and in order of their signal
strength.
Note:
• " " flashes in the display until BSM operation is completed.
• If there are fewer than 6 strong stations in the area, some of the preset buttons will not be assigned
frequencies, so they will retain any frequencies assigned to them previously.
• To cancel the process, press the BSM button before memorization is
complete.
7
All manuals and user guides at all-guides.com
"LOC"