ENGLISH
pro 230
Wet N' Dry
straightener
Straighten and sculpt your hair ful-
ly! No longer any need to wait until
your hair is completely dry. Thanks
to the exclusive Wet N' Dry evapo-
ration system, from now on you
can use your straightener on damp
hair. By using the dampness in
your hair, you can straighten more
deeply and thus obtain results that
are even softer and silkier, and a
hold that is even longer lasting.
The straightener heating plates
have a new Ceramic and Titanium
micro-particle
to this technology, the plates are
smoother and they guarantee per-
fect glide to respect your hair even
more.
FEATURES
• Use on dry or damp hair
• Plates with Ceramic Titanium
coating
• Exclusive evaporation system
• On/Off switch – Automatic switch
off
• 5-position temperature selectors,
130°C to 230°C
• Fast heat up
• Removable untangling comb
• Automatic shut-off
• Swivel cord
USE
Before using, read the safety pre-
cautions at the end of the booklet.
coating.
Thanks
To straighten your hair
• Prepare your hair for straigh-
tening: wash your hair and
untangle using a big tooth comb
and then dry using a hairdryer.
• Divide your hair into sections. Pin
the upper sections with clips to
work with the hair underneath.
• Plug the BaByliss pro 230 Wet
N' Dry straightener in and press
the ON/OFF button. Wait a few
minutes until the straightener has
heated up.
The first time you use the unit, you
might notice a little smoke and a
particular odour: this is common
and will disappear the next time you
use the unit.
• A green LED will light up, an
indicator light for the lowest
temperature.
• Select the desired temperature
using the temperature selectors.
A lower temperature is generally
recommended for fine, bleached
and/or damaged hair, and a
higher temperature for curly,
thick and/or difficult to style hair.
Since every hair type is unique,
we recommend you use position
1 (green LED) the first time you
use it. Progressively increase the
temperature, if necessary, during
the following uses. Use the table
below as a guide:
The LED of the selected temperature
blinks until the temperature is
reached, then it remains lighted
during the whole using time.
5