Automatic Operation - Toshiba RBC-SR1-PE Manual Del Usuario

All manuals and user guides at all-guides.com
AI R
EMOTE
A
UTOMATIC
The Main Isolation Switch needs to be set to the "on" position (the operation lamp flashes).
Caution
Do not turn the power OFF while the machine is in use.
If the air conditioner is to be used after a long period of mains power isolation, ensure the air
conditioner has mains power supplied for 12 hours before operation.
MODE FAN CENTRAL
FAN ONLY AUTO OPERATION
COOL HIGH STANDBY
MED PREHEAT
HEAT LOW DEFROST
AUTO FILTER
TEMP CHECK LOUVER
UNIT MANUAL
˚ C
88
TIMER CONT. OFF ON ADDRESS
88 : 88
H M
1. MODE Button
Select the AUTO mode by pressing this button.
FAN ONLY COOL HEAT AUTO
2. FAN Button
Selects the desired fan speed mode. Each time
it is pressed, the display changes in the
following sequence:-
AUTO HIGH MED LOW
In the AUTO mode, the fan speed changes
according to the room temperature.
3. TEMP ADJUST ( ) Buttons
These buttons are used to set the required room
temperatures (18-29°C).
GB
C
ONTROLLER
O
PERATION
1 2
NETWORK
REMOTE CONTROLLER
3
MODE
- +
TIMER ADJUST
CHECK FILTER
ON/OFF
4
4. ON/OFF Button
When this button is pressed, the air conditioner is
started or stopped.
If the operation of the air conditioner is
stopped and immediately restarted by
pressing the ON/OFF button, the air
conditioner will not operate for 3 minutes to
protect the unit. After the three minutes, the
unit will be allowed to start.
– 7 – – 7 –