Factory Reset; Software Update - Lenco DIR-200 Manual Del Usuario

5.2.6. Factory reset

A factory reset resets all user settings back to default settings. All the
presets, time, date and network configuration will be lost.
However, the current software version of the device can be stored as
it is registered with the internal radio portal. All favourites in the
Internet radio is also stored. Unless you re-register your device with
another account on the portal website.

5.2.7. Software update

Software upgrade to fix bugs and/ or additional features will be
available.
The device is set as default to automatically check for updates'
availability periodically. You may also check the updates' availability
manually. If a newer software is available, you will be informed. Then
you may decide if you want to download and install the new software.
After a software upgrade, all user settings are maintained.
NOTE: NOTE:
NOTE: NOTE: Before starting the software upgrade, ensure that the device is
plugged into a stable main power connection. Disconnecting power
during the upgrade may permanently damage the device.
5.2.8. Info
View the firmware version and the radio ID.
5.2.9. Backlight
Allow you to change the backlight level of High, Medium or Low (in
power on or standby mode). The timeout duration can be adjusted,
which allows the radio turns to standby backlight level when it has
not being used.
5.3. 5.3. Internet Internet Radio Radio
5.3. 5.3. Internet Internet Radio
The device can be channel to radio stations and podcasts from
around the world through a broadband Internet connection.
When you select Internet radio, the device directly contacts the
Frontier Silicon Internet radio portal (which is supported by v-tuner)
and obtain a list of stations.
Radio
14