1. Use 8 pcs TA4*12 screws to fix the angle iron on the left and right stand
board separately.
2. Fix the 4pcs of nut screw into the four holes of connection boad.
3. Use the 4pcs of TM6*50 screw to fix the connection board with the left
and right stand board, then the stand is assembled ready.
4. Put the piano body on the wooden stand and use the 4pcs of TM6*20
screw to fix it.
Turn on power
Press [POWER] button to turn on power, press it again to turn off power of
electrical piano.
Master Volume Adjustment
After turn on the piano, turn the [MASTER VOLUME] button to the right,
adjust the volume from small to big. Users can do the suitable adjustment on
the whole volume which depends on their requirement.
Play the keyboard with different voice
Tone Selection
There is 0~299 , total 300 kinds of voice for your choice. The detailed voice,
please refer to the tone list.
The default status is [TONE], when the electrical piano is open. If current
status is not TONE. you need to press [TONE] button.
And you can select voice by pressing the number 0~9 number or
"+", "-" button. The LED display will show the number that you choose. If you
select the voice by pressing the three numbers and the number is above 300, it
is not effective and the voice will resume to the
previous one.
EFFECTS & CONTROLS
Double Voice
Under normal status, press [DOUBLE] button, the digital piano enters the
model of dual voice. Namely each note is composed of two voices. The first
voice is the voice before you pressed [DOUBLE] button,
and the second voice is the selected voice after pressed [DOUBLE] button.
If the function is off, LED display shows "dbl/Off", the voice will resume to the
current voice.
Keyboard split
Press [SPLIT] button, from the left 24th button, the keyboard forms left and
right two tone keyboards. In 'tone' mode, press number or
"+/-" button to adjust voice for right zone keyboards. Press [SPLIT] button
again, exit the function. The keyboard resume to the voice
of low key area.
EN
29