Kinderkraft FLO Manual De Uso página 16

heaters, gas heaters, etc.
• Do not turn the rocking function after locking the device (Fig. XV).
Do not use the product if any parts are damaged or missing.
Do not use any accessories or spare parts other than those recommended by the
manufacturer.
The adapter used with the product should be regularly checked for damage to the cord,
plug, housing and other parts. In case of damage to the parts, stop using the adapter.
The product should only be used with an adapter recommended by the manufacturer.
The power supply adapter cord are not toys and should not be available for children to
play.
Do not connect the adapter if the batteries are inserted in the device.
Safe battery use
Disposable batteries are not suitable for charging. Do not mix different types of batteries, or new
batteries with used ones. Insert the batteries according to their proper polarity. Dead batteries
must be removed from the product. Do not short-circuit power poles. The batteries can be
charged only under adult supervision. The batteries must be charged outside the device.
Technical specifications:
Battery-powered: 4 batteries x C (R14) 1.5 V (not included)
Power supply via USB cable (included), requires USB-A slot plate adapter with output
parameters: 5V, minimum current 1A.
Assembly of the product:
Follow Figures II – XIII. Additionally, you may attach a mosquito net around the textile upholstery
(1).
Installing or replacing batteries (Fig. XII, XIII):
In order to install or replace the batteries, use a Phillips screwdriver to remove the securing flap
of the battery compartment. Insert the batteries, observing correct polarity. Screw the flap back
into its place.
Swing control (Fig. XIV):
After installing the batteries or connecting the power supply using the wire provided, press A
button to start the mechanism. To start the rocking function, press "B" button. Press several
times more to change the rocking intensity, which is signalled by LEDs 1, 2 and 3. Holding down
"B" button will stop the rocking function. To start the music function, press "C" button. To change
the melody, press "D" button (8 options). To change the volume, use "F" and "E" buttons. To
turn off the sound, press "C" again. To start the time switch, press "G". By pressing this button
you may change the timer setting (10 min., 20 min., 30 min.) or switch off the function.
16