Lenco IPD-4000 Manual De Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

OWNER'S MANUAL
1) To Fast Forward, Press and Hold the NEXT button of iPod unit while
playing a song.
2) Press PREV button on the remote control or iPod unit to go back to the
previous song. To Rewind, Press and Hold the PREV button of iPod unit
while playing a song.
3) Press MENU button on the remote control, the iPod will go to the previous
menu. Press UP/ DOWN button on the remote control to select up or
down of the iPod menu; then press the ENTER button to enter selected
menu.
4) When iPod Video is plugged into this unit, the video can be viewed from
other display by connecting the VIDEO OUT jack to the desired video
display ( video connection cable is not included).
Remarks:
Please make sure the TV Out is set to ON in the iPod Video
Setting menu. Otherwise the video signal will not be able to
show on the display. (For detail, please check the iPod Video
Instruction Manual.)
5) When the iPod is docked in the unit, the iPod internal battery can be
charged during iPod playback, Pause mode or AUX mode, if the main
power is switched "Off", the charging will be cut off
Note : You must keep the main power switch "On" during iPod
internal battery charging.
AUXILIARY IN
Connect the Audio Output jacks of your auxiliary sound source (TV, VCR, DVD
Player, Cassette Deck, Mini Disc player, etc., etc.,) to the AUX IN jack on the
back panel of the unit. The auxiliary function will only activate when the
aux in jack is fitted with connection cable
Note: The connection cables are not included.
1.
Press and hold the PLAY/PAUSE button on the main unit or IPOD/AUX
button on the remote control to inter-change the play mode from iPod to
Aux. Press PLAY/PAUSE button once on the main unit or remote control
to inter-change the play mode from Aux to iPod . During AUX playback,
the iPod display will not light up.
8
All manuals and user guides at all-guides.com
iPod Hifi Docking station
®
iPod Hifi Docking station
OPERATING INSTRUCTIONS
Make sure the AC power cord from this unit is properly connected to
a 230V 50Hz household AC power outlet.
Make sure that the minimum distance around the whole unit for
sufficient ventilation is 10cm.
®
Listening to Your iPod
Charging The Battery
IMPORTANT!
In order to prevent unwanted distortion during iPod
recommended that you set the EQ in your iPod
position. Go to the Main Menu in your iPod
Settings Menu, select the EQ Setting, and make sure that the EQ
function is set to "Off".
( Main Menu > Settings Menu > EQ Setting > Select "Off" )
Note : We have also included one flat adaptor
with no opening at all. This serves as a dust
cover that can be inserted in the docking station
®
if no iPod
will be connected to this unit for an
extended period of time. Remove this dust cover
before use.
This unit provides an iPod docking station on the top panel. You can
connect any "dockable" iPod , available as of August 2006, to the docking
station and play your iPod through the speakers of this unit. The power to
your device is being supplied by this unit, not by the iPod internal battery.
1) Turn the main power switch to 'On' position at the back of the unit.
2) Plug the iPod to the iPod docking station. Then press PLAY/PAUSE
button on the top panel or remote control to start music playback.
3) To pause momentarily during iPod playback, press the PLAY/PAUSE
button on the top panel or remote control or iPod
OWNER'S MANUAL
®
playback, it is
®
to the "Off"
®
and then select the
unit. Press the
7

Publicidad

Tabla de contenido
loading

Tabla de contenido