Care And Maintenance; Technical Information - Lenco IPD-4000 Manual De Usuario

All manuals and user guides at all-guides.com
iPod Hifi Docking station
1. Turn your auxiliary source 'On' and operate it as usual. The sound from
the auxiliary source will be heard through the speakers of this system.
2. Adjust the VOLUME level controls of this system as desired.
RESETTING
If the system does not have any respond, you may have experienced a severe
electric shock (ESD) or a power surge that triggered the internal computer to
shut down automatically. If this occurs, simply disconnect the main power and
connect the main power again after one minute.
Note: Although disconnect the power will unlock the internal computer after a
power surge, it will also erase all of the settings. After turning 'On' the unit, you
will need to reset the settings again.

CARE AND MAINTENANCE

CARE OF THE CABINET
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any
wax, polish sprays, or abrasive cleaners on the cabinet.
CAUTION
Never allow any water or other liquids to get inside the unit while cleaning.

TECHNICAL INFORMATION

AC Power: AC 230V ~50Hz
Remote Handset DV 3V size: CR2025 X 1
Unit Output Power: 2 X 10 Watts RMS (Main Speaker)
1 X 50 Watts (Subwoofer)
Power Consumption: 90 W
Weight: Approx. 8.8kg
Unit Dimensions: Approx. 450(L) X 199(W) X 183(H) mm
Operation temperature: +5 C +35 C
If at any time in the future you should need to dispose of this product please
note that. Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice.(Waste Electrical and Electronic Equipment Directive)
OWNER'S MANUAL
9