Using The "Low Cut" Filter - Sennheiser MKE 600 Instrucciones De Uso

All manuals and user guides at all-guides.com

Using the "Low Cut" filter

2
Set the "Low Cut" switch to the desired position.
2
Switch position Frequency response of the microphone
linear frequency response
frequencies below 100 Hz are attenuated to
reduce wind and impact noise
Cleaning and maintaining the MKE 600
CAUTION
Damage to the product due to liquids!
Liquids entering the product can short-circuit the electronics or dam-
age the mechanics. Solvents or cleansing agents can damage the sur-
face of the product.
Keep all liquids away from the product.
Only use a soft, dry cloth to clean the product.
4 | MKE 600