Service Information - Black and Decker PRO BT1400 Manual De Instrucciones

Separate collection of used products and packaging allows materials to be recycled
and used again. Re-use of recycled materials helps prevent environmental pollution
and reduces the demand for raw materials.
Local regulations may provide for separate collection of electrical products from the household,
at municipal waste sites or by the retailer when you purchase a new product.

SERVICE INFORMATION

Black & Decker offers a full network of company-owned and authorized service locations.
All Black & Decker Service Centers are staffed with trained personnel to provide customers with
efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory
replacement parts, contact the Black & Decker location nearest you.
SPECIFICATIONS
Power
No-Load speed
TROUBLE!
SAW MAKES UNSATISFACTORY CUTS
WHAT'S WRONG?
3. Gum or pitch on blade.
4. Incorrect blade for work being done.
TROUBLE!
BLADE DOES NOT COME UP TO SPEED
WHAT'S WRONG?
1. Extension cord is too light or too long.
2. Low house current.
TROUBLE!
MACHINE VIBRATES EXCESSIVELY
WHAT'S WRONG?
1. Saw not mounted securely.
2. Stand or bench on uneven floor.
3. Damaged saw blade.
1. Miter scale not adjusted correctly.
2. Blade is not square to fence.
3. El disco no está perpendicular a la mesa.
4. Workpiece moving.
TROUBLE!
MATERIAL PINCHES BLADE
WHAT'S WRONG?
1. Cutting bowed material.
All manuals and user guides at all-guides.com
1500W
55000 rpm
WHAT TO DO...
3. Remove blade and clean with turpentine and coarse
steel wool or household oven cleaner.
4. Change the blade.
WHAT TO DO...
1. Replace with adequate size cord.
2. Contact your electric company.
WHAT TO DO...
1. Tighten all mounting hardware.
2. Reposition on flat level surface.
3. Replace blade.
1. Check and adjust.
2. Check and adjust.
3. Verifique y ajuste la guía.
4. Clamp workpiece to fence or glue 120 grit
sandpaper to fence with rubber cement.
WHAT TO DO...
1. Position bowed material as shown in
Fig. K.
37
ENGLISH