Tools Needed - Escalade Sports HARVARD G02224W Manual

IMPORTANT! READ EACH STEP
IN THIS MANUAL BEFORE YOU
BEGIN THE ASSEMBLY.
TWO (2) ADULTS ARE REQUIRED TO ASSEMBLE
THIS 5-IN-1 TRAIN-N-PLAY GAME CENTER

Tools Needed:

Wrenches T1 and T2 (Included with the Hardware Kit)
Philips Screwdriver
Adjustable Wrench or Socket Set is helpful but not required.
Make sure you understand the following tips before you begin to assemble your 5-in-1
Train-N-Play Game Center.
1.This is an electrically operated product. It is intended for INDOOR use ONLY.
2.This product is not designed to be used in a garage or on a patio, sunlight may effect
the infrared sensors and the unit will not perform correctly.
3.Tighten hardware as instructed.
4.Do not over tighten hardware,as you could crush the tubing.
5.Some drawings or images in this manual may not look exactly like your product.
6.To prevent damage to the electronics do not place this unit any closer that six inches
from the wall.
READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND
SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO
ADULTS ARE NEEDED TO PUT THIS 5-IN-1 TRAIN-N
All Rights Reserved
© 2010 Escalade Sports
-PLAY GAME CENTER TOGETHER.
2
!
For Customer Service Call 1-888-996-2729