Maintenance, Storage And Transport - GreenWorks Tools 2600107 Manual De Uso Y Mantenimiento

Always be sure of your footing,
and keep a
handle. Walk, never run!
Use limitations
Do not use the machine
sideways on a slope. Always
move from top to bottom,
then from bottom to top.
Exercise caution when
changing direction on a
slope. Avoid steep slopes.
Do not use the machine if
the guards are
or if the safety devices are
not correctly positioned.
Never disengage or tamper
with the safety systems.
Do not overload the machine
by driving it too fast.
Do not place hands inside
the chute or the auger without
removing the battery.
Use only attachments and
accessories approved by the
manufacturer of snow thrower
(such as wheel weights,
counterweights, cabs, etc.).
Do not carry passengers.
Take all possible precautions
when leaving the machine
unattended. Disengage the
power take-off, lower the
attachments, shift into neutral,
set the parking brake, stop the
engine and remove the key.
2.4 MAINTENANCE, STORAGE
AND TRANSPORT
Ensure regular maintenance
and correct storage to
maintain machine safety.
Before cleaning or
doing maintenance work,
remove the battery and read
the relevant instructions.
Wear proper clothing and
hold on the
protective gloves whenever
your hands are at risk.
Faulty or worn-out parts
must always be replaced
and never repaired. Only
use original spare parts:
the use of non-original and/
will compromise the safety
of the machine, may cause
accidents or personal injuries
for which the Manufacturer
is under no circumstance
liable or responsible.
Maintenance
The battery, if damaged, must
be replaced with a genuine
part only, by your dealer or an
authorised assistance centre.
Storage
Run the machine a few
minutes after throwing
snow to prevent freeze-up
of the collector/impeller
Let the motor cool down
before storing the snow
thrower indoors.
Always refer to owner's
guide instructions for
important details if the
snowthrower is to be stored
for an extended period.
Transport
Each time you have to move, lift,
transport or tilt the machine:
Wear heavy work gloves.
Hold the machine in the
points
taking into account the
weight and its division.
Use an adequate number
of people for the weight
of the machine and the
characteristics of the
transport vehicle.
EN - 4
a safe grip,