Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert Symbol
Read Operator's Manual
Wear Eye and Head
Protection
Wet Conditions Alert
Gloves
Safety Footwear
Keep Tool Away from
Electrical Lines/Keep
Bystanders Away
Electric Shock
No Hands Symbol
Recycle Symbol
V
Volts
Direct Current
SYMBOLS
NAME
6 — English
EXPLANATION
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and
understand operator's manual before using this
product.
Always wear eye protection with side shields
marked to comply with ANSI Z87.1, along with
head protection.
Do not expose battery, battery compartment, or
electronic components to rain, water, or liquids.
Do not charge battery or expose product to rain or
damp locations.
Wear non-slip, heavy-duty protective gloves when
handling the pole saw and the blade.
Wear non-slip safety footwear when using this
equipment.
DANGER! Risk of electrocution! Keep tool 50 feet
away from electrical lines. Keep all bystanders at
least 50 ft. away.
Failure to use in dry conditions and to observe safe
practices can result in electric shock.
Failure to keep your hands away from the blade will
result in serious personal injury.
This product uses lithium-ion batteries. Local, state
or federal laws may prohibit disposal of batteries in
ordinary trash. Consult your local waste authority
for information regarding available recycling and/
or disposal options.
Voltage
Type or a characteristic of current