IKEA TREDANSEN Manual Del Usuario página 5

Instructions for use
Connect the power supply unit into the
wall socket, insert the signal repeater
into the free slot.
When charging, only use recommended
USB cables for your device and replace
faulty cables immediately.
Remote functions
Up:
Press to raise your wireless blind.
Down:
Press to lower your wireless blind.
Pairing: Used to add IKEA Home
smart products to your system.
IMPORTANT: The signal repeater needs
to be plugged in and powered to be
able to control your blind with the
remote!
Signal repeater function
With TRÅDFRI signal repeater you can
expand the signal reach of your IKEA
Home smart products.
Using your wireless blind
To raise blind to top position:
Press the up button once (short press)
on the remote or on the blind.
To lower blind to bottom position:
Press the down button once (short
press) on the remote or on the blind.
To raise the blind:
Press and hold the up button on the
remote or on the blind.
While pressing the button, the blind
will rise. Release the button once the
desired height or maximum height is
reached.
To lower the blind:
Press and hold the down button on the
remote or on the blind.
While pressing the button, the blind
will lower. Release the button once
the desired height or the maximum
extension is reached.
Setting desired minimum height:
Only the buttons on the blind can be
used to set this level.
Move the blind to the desired height.
Afterwards, short press either the up
or down button on the blind twice to
save this position as the new minimum
height.
The blind will move slightly up and
down to confirm the setting.
Resetting minimum height:
To change the minimum height or
revert to the default minimum height
setting, first move the blind to the top
5