SOLAC CP7397 Instrucciones De Uso página 9

APPLIANCE, PROCEED AS
FOLLOWS:
Open the top shell of the appa-
•
ratus, removing previously with
the help of a screwdriver fixing
screws.
Identify the battery wires and cut
•
their (Red and Black). To avoid
risks of a short circuit with a pos-
sible residual battery load, first
cut the Red wire and protect it by
using insulating tape, then pro-
ceed to cut the Black wire proce-
eding in the same way.
Safely remove the battery from
•
its housing.
EN