Charging The Battery; Before Use - SOLAC CP7397 Instrucciones De Uso

CHARGING THE BATTERY:

Caution: a new battery is not fu-
•
lly charged and must therefore be
charged before the appliance is
used for the first time.
Charge the battery at an atmos-
•
pheric temperature of between 4
and 40ºC
Connect the charger to the jack
•
using the socket on the appliance.
The socket is located at the lower/
back part of the appliance.
Plug the charger into the mains.
•
The red light will come on to indi-
•
cated that the charger is charging
the battery
Approximately 8 hours are needed
•
for a complete charger of the ba-
ttery. Never attempt to overcharge
the battery (although it is recom-
mended that the first charge of the
battery be of 16 hours in duration)
When the battery is full charged,
•
disconnect the charger from the
mains supply.
Do not use the appliance while it is
•
connected to the charger.
INSTRUCTIONS FOR USE

BEFORE USE:

Make sure that all products' packa-
•
ging has been removed.
Before using this product for the
•
first time, it is important to make a
full charge of batteries.
USE:
The appliance can be used by
•
using his batteries.
Extend the cable completely before
•
plugging it in.
Connect the appliance to the
•
mains.
Remove the protective cover
•
Make sure that the blades are co-
•
rrectly aligned.
Turn the appliance on, by using the
•
on/off button.
The green light (?) will come on
•
to indicated that the battery is dis-
charging
Turn the appliance on, by using the
•
selection knob.
Select the desired cutting height
•
using the comb height selector
Press it and adjust the height ac-
cording to the desired cutting len-
gth.
The appliance gives to you the
•
choice of trimming or shaving.
ONCE YOU HAVE FINISHED
USING THE APPLIANCE:
Turn the appliance off using the on/
•
off button.
Modify:
•
EN