Carson MicroFlip MP-250 Manual página 3

UV LIGHT:
Some subjects may have enhanced resolution
when using the UV light.
Press and hold the UV light switch to activate
the UV light.
Please note, the UV light is deactivated when
the base plate is flipped down to the base of
the microscope.
WARNING: Do not look
directly at UV light.
USING ADAPTER CLIP
Align the camera of the
phone to the center of the
circular hole of the adpater
clip.
MULTIPLE CAMERA PHONES:
If there is more than one rear facing
camera, use the primary one. Typically,
the primary is a 1x wide-angle color
camera and the other camera(s) are
secondary.
For the latest instructions on multiple
camera phones, please visit
www.carson.com/multicam
If you experience any difficulties, please contact us and we will be happy to help you.
info@carson.com
Attach the adapter clip to the
top of the microscope and turn
on camera.
If viewing image is not centered
or is not a complete round
image, adjust adapter clip
making sure it is centered over
camera.
Note: Always hold the phone
securely during use. If you
release the phone while it is
attached to the microscope it
can fall and damage the phone.
For warranty information, visit www.carson.com/warranty
Carson Optical 2070 5th Avenue, Ronkonkoma, NY 11779 | Tel: 631-963-5000
CARE
Clean using microfiber lens cloth. Do not use any
abrasives, chemical cleaners, or solvents.
Customer Service:
uksupport@carson.com
www.carson.com
To maximize your image,
pinch screen to enlarge.
For best results, use in
video mode.
eusupport@carson.com
3