Care And Maintenance - Joovy Foodoo Manual De Instrucciones

Care & Maintenance
Maintenance
All of the locking mechanisms, snaps, rivets, and other hardware and plastic parts on the high chair
should be inspected periodically to ensure that they are secured properly and not damaged or
malfunctioning. The restraint system, as well as all other fabric items and their stitching should also
be inspected periodically to ensure that they are secured properly and not loose, torn or otherwise
damaged. All moving parts should also be checked periodically to ensure they are operating properly.
Any missing, broken, or worn components should be replaced immediately, and the high chair
should not be used until they are replaced. Only original manufacturer's components should be
used. If needed, please contact Joovy (USA) or Elfe Juvenile Products (Canada) at our toll-free
phone number.
Cleaning
The fabric material on the seat can be cleaned using mild household soap or detergent and warm
water on a sponge or clean cloth. Always allow the fabric to completely air dry before using or
storing this seat.
Alternatively, the seat fabric can be machine washed cold and air dried. DO NOT dry in a dryer.
Removing and Reinstalling the High Chair Seat Fabric
• To remove the seat fabric, first detach the tray and put it aside.
• Unsnap the snaps on BOTH sides of the seat. (41)
• Unhook the seat fabric from the seatback on BOTH sides. (42)
• Pull the top of fabric off the seat back. (43)
• Turn the plastic ends of BOTH shoulder strap sideways and push them through the slots in the
seatback. (44)
• Do the same for the plastic ends of BOTH waist straps. (45)
• Reach underneath the high chair and do the same for the plastic end of the crotch strap. You may
want to gently tip over the high chair to do this. (46)
• Remove the fabric from the high chair.
• Now you can remove all the straps from the seat fabric by turning each plastic end sideways and
pushing it through the fabric.
REMOVE ALL STRAPS AND BUCKLES BEFORE WASHING THE FABRIC.
• After washing and air drying the fabric seat, reinstall it by following the above directions in the
reverse order. Ensure that all plastic ends of the straps are secure by pushing them through their
slots and turning them sideways to lock them into position.
10