ECRON HB1946 Manual De Instrucciones página 48

6. Plug in the appliance. Press and hold the low speed
button. At the same time, you can select the desired speed
by turning the control dial. The speed will gradually increase
as the dial is turned from left to right.
7. The appliance can also be put into use pressing the high
speed button (turbo button). The appliance will operate at
maximum speed at any time. In this case, the speed will not
change even if the control dial is turned.
8. To stop the appliance, release the high speed button or
the low speed button on the motor compartment.
9. After using the mincer, firstly unplug it and then remove
the motor compartment from the lid, turning it in an
anti-clockwise direction.
10. Open the mincer lid, turning it in an anti-clockwise direc-
tion and take out the minced food.
Warning
• To reduce the risk of injuries, never place the blade on the
base without having put the bowl correctly in place before-
hand.
• Before using the appliance, ensure that the lid of the
mincer is correctly in place and closed.
After using the mincer, and for your safety, firstly the motor
compartment must be disassembled from the mincer lid,
48