Before First Use
• Remove all packaging material and check whether the appliance is complete and undamaged.
• Fully unwind the power cord (11) and make sure that the power cord (11) is clamped into the cable guide
(10) underneath the appliance.
• Clean the appliance as specified under „Cleaning and Care".
Warning: Plastic bags are a danger to toddlers and babies, therefore keep them away to avoid
suffocation.
Operation
Assembly of the citrus juicer
1. Place the appliance on an even and heat resistant surface.
2. Place the juice collector (7) onto the driving shaft (4) of the motor unit (1).
3. Insert the fruit pulp filter (6).
4. Attach the pressure cone (5) to the driving shaft (4) by pressing it slightly down. Make sure that it is
properly engaged.
5. Insert the fruit dome (3) into to the press handle (2) and turn it anti-clockwise to fasten it.
Extracting Juice
Warning: Never use the appliance without the juice collector.
Tip: Cut the citrus fruits into halves before starting with the juicing process. If necessary cut off the
ends of the fruit tips to ensure perfect contact with the fruit dome.
1. Follow the assembly instructions and make sure that the appliance is not connected to a power outlet.
16