Korona 27050 Manual De Instrucciones página 17

2. Place a suitable juice container (glass, etc.) underneath the spout and press it down to open the juice
outlet.
To activate the drip stop function, press the spout upwards.
3. Place the citrus fruit halve, flesh down, onto the pressure cone (5).
4. Connect the appliance to a properly installed wall socket.
5. Lower the press handle (2) onto the fruit until the fruit dome (3) covers it. As soon as pressure is applied
to the cone (5), the appliance switches on automatically and the juice extracting process begins.
Note: To avoid damage to the appliance, never apply too much pressure on the pressure cone.
6. Once the extracting process is complete, disconnect the appliance from the mains.
Note: Never exceed the max. capacity of the juice collector (7), in order to avoid liquid running into
the motor unit. If necessary, remove the fruit pulp and juice.
7. Lift up the press handle (2), remove the filter (6) and the juice collector (7) from the appliance and pour
yourself a glass of freshly squeezed juice.
Always make sure to disconnect the appliance from the mains before removing the accessories.
Instruction Manual
ENGLISH
17