Navigating The Menu; Language Setup - Stagnoli ACNSEM3L Manual Del Usuario

Keep the following in mind while navigating in the menu:
- if button "E" is pressed for 1s, it functions as "ENTER" while, when pressed for 3s it functions as "ESC"
- the control unit does not regard any control signals when the user is navigating the menu.
000s
IT
The default language on the control unit is English; to select another language, access the menu by pressing the "E" button, then click on
the down arrow five times until the language menu is displayed, then press "E" once again to select it. Now you can choose your preferred
EN
000s
FR
ES
DE
10

NAVIGATING THE MENU

As shown in figure, the home screen shows a series of characters of which the first three represent the cycling
time. The fourth character appears only during the area clearance time and it is represented by a blinking "S".
In the event of two or more inputs being activated, the cycling time is obscured, leaving its place to the number
of the respective input that has been selected until the input state has been restored.

LANGUAGE SETUP

Stagnoli control units are available in 5 different languages:
ITALIAN - ENGLISH - FRENCH - SPANISH - DUTSCH
language by using the up/down arrows and select it by pressing "E".
time
DESCTIPTION OF TIMING PARAMETERS
000
TIME FUNCTIONS
Green timing
TV1 DIP1
light 1
Green timing
TV2 DIP2
light 2
Area clearance
TSG DIP3
timing
Yellow light
TAR DIP4
time
Mixed Logic
TMI DIP5
Time
DIP6
DIP7
DIP8
ling
EN
LANGUAGE
Functioning
ITALIANO
Logic
Traffic light with
ENGLISH
3 lights
Behavior with
FRANCAIS
resting lights
with DIP1 = 0
Behavior in
DEUTSCH
alarm state
Blinking before
ESPANOL
switching light
INPUT 1 behavior
INPUT 2 behavior
INPUT 3 behavior
000S
RESET
Reset all parameters
RESET
and functions
www.stagnoli.com