Lotus SmarTime 50044 Manual De Usuario página 10

1.6.2. Call records:
Show the records of connected and dialed
calls. It can save more than 50 call records.
When full, it starts to overwrite. Click any call
record to call back.
1.6.3. Dial pad
Type the phone number wanted and tap call
icon.
1.7 Contact person
Find Frequent contacts in app/Device/Fre-
quent contacts and add contacts from you
mobile contacts. Then Sync to watch and you
can call them from the list in the watch.
1.8 Data
Health Data is activated by default. Swipe to
left on the Dial interface to enter the Data in-
terface. Data interface shows steps, distance
and calories. The data will be cleared after
12 pm every day. You save the data by being
connected to the app every day.
1.9 Sports mode
1.9.1 Select Sports (Walking, Running, Cy-
cling, Rope skipping, Badminton, Basketball,
Football) and start and pause a session by
tapping or by pressing the button. Stop the
session by tapping.
1.9.2 The work out can only be saved if it
lasts for more than 1 min. Or you will see "too
little data to save" when stopping. You save
the data by being connected to the app every
day.
1.10 Heart rate
Wear the watch tight on your wrist, select Heart
rate and it starts to measure. The measurement
will be completed in 10-20 seconds.
1.11 Blood pressure
Wear the watch tight on your wrist. Select
Blood pressure and it starts to measure. The
measurement will be completed in 10-20
seconds.
1.12 Music
Connected to the APP, start any music in your
mobile phone. Select Music and you can con-
trol mobile phone music by start, pause and
skip. If connect to the Audio Bluetooth with
the phone, music plays through the speaker
of the watch. To turn off watch speaker, dis-
connect Audio Bluetooth.
1.13 Sleep monitoring
Wearing your watch at night, your Sleep will
be monitored every night from 6 o'clock PM
to 10 o'clock AM in next morning. The watch
displays deep sleep, light sleep and total
sleep duration. You save the data by being
connected to the app every day.
1.14 Stopwatch
Find the Stopwatch in the menu or shortcuts.
Start and pause by tapping icon or pressing
the button. Stop by tapping.
1.15 Find phone
When connect with app, tap Find phone in
menu and the phone will vibrate and sound
to be found,if mobile settings allow. Open
the app to turn off.
1.16 Breathing
Before you tap to start, you can set the breath-
ing pace (slow/medium /fast) and duration
(1, 2 or 3 min).
1.17 Massage
Tap the green button to start the massage
and stop by tapping the red button.
1.18 Menu style
Select between list, grid and rotating menu.
1.19 Settings
1) Language
The language of the watch will by default be
identical with the language of the connected
mobile. If your mobile language is not repre-
sented in watch, English is default. There are
6 languages optional. Choose Language in
Settings and select preferred language.
2) Dial Switch
Switch your dial by swiping right or left to
select and tap preferred watch face. You can
also customize or select from a wider range
by entering Watch face in the app.
3) Screen time
Set the screen time. The watch automatically
turns of the display when timed out.
4) Vibration intensity
Set the Vibration intensity of the watch.
5) Factory reset
When selecting Factory reset, all collected
data in the watch will be deleted.
10 10