Package Contents; Description (Fig. A); Electrical Safety - Berner BSS 700 E Instrucciones De Manejo

Check for misalignment and seizure of moving
parts, breakage of parts and any other
conditions that may affect its operation. Have
damaged guards or other defective parts
repaired or replaced as instructed.
Do not use the tool if the switch is defective.
Have the switch replaced by an authorized
BERNER repair agent.
20 Have your tool repaired by an authorized
BERNER repair agent
This Power Tool is in accordance with the
relevant safety regulations. To avoid danger,
electric appliances must only be repaired by
qualified technicians.
Additional safety rules for cutsaws
Plugging into the mains, switching on and off
• Always ensure that the saw is switched off before
plugging into the mains.
• After switching off, never attempt to stop the saw
blade with your fingers.
• Never put the saw down on a table or work
bench unless switched off. The saw blade will
keep running briefly after the tool has been
switched off.
When sawing
• When using saw blades specially designed for
cutting wood remove all nails and metal objects
from the workpiece before starting work.
• Wherever possible, use clamps and vices to
fasten the workpiece securely.
• Do not attempt to saw extremely small workpieces.
• Do not bend too far forward. Make sure that you
always stand firmly, particularly on scaffolding
and ladders.
• Always hold the saw with both hands.
Checking and changing the saw blade
• Unplug the tool before cleaning or changing the
saw blade.
• Only use BERNER saw blades conforming to the
specifications contained in these operating
instructions.
• Only sharp saw blades in perfect working
condition should be used; cracked or bent saw
blades should be discarded and replaced at
once.
All manuals and user guides at all-guides.com

Package contents

The package contains:
1 Cutsaw
1 General purpose saw blade set
1 Allen key
1 Key holder
1 Kitbox
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or accessories
• Take the time to thoroughly read and understand

Description (fig. A)

Your cutsaw BSS 700 E is a versatile power tool
designed for professional sawing applications.
1 Variable speed switch
2 Allen key
3 Key holder
4 Blade holder
5 Saw blade
6 Saw shoe
7 Saw blade fixing screw
8 Housing

Electrical safety

The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Mains plug replacement
(U.K. & Ireland only)
• Should your mains plug need replacing and you
• Disconnect the plug from the supply.
• Cut off the plug and dispose of it safely; a plug
• Only fit 13 Amperes BS1363A approved plugs
which may have occurred during transport.
this manual prior to operation.
Your BERNER tool is double insulated in
accordance with EN 50144; therefore no
earth wire is required.
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorized
BERNER repair agent or a qualified electrician.
with bared copper conductors is dangerous if
engaged in a live socket outlet.
fitted with the correctly rated fuse (1).
E N G L I S H
13