Residual Risks; Package Contents - Berner BCS-61 Instrucciones De Manejo

EN GLI SH
• Do not use water feed attachments.
• Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the work by hand or
against your body leaves it unstable and may
lead to loss of control.
• Keep your body positioned to either side
of the blade, but not in line with the saw
blade. KICKBACK could cause the saw to
jump backwards (see Causes and Operator
Prevention of Kickback and KICKBACK).
• Air vents often cover moving parts and
should be avoided. Loose clothes, jewellry or
long hair can be caught in moving parts.

Residual Risks

The following risks are inherent to the use of circular
saws.
– Injuries caused by touching the rotating parts or
hot part of the tool.
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing.
– Risk of squeezing fingers when changing the
accessory.
– Health hazards caused by breathing dust
developed when working in wood.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
DATE CODE POSITION (FIG. 1)
The date code (jj), which also includes the year of
manufacture, is printed into the housing.
Example:
2013 XX XX
Year of Manufacture
44

Package Contents

The package contains:
1 Circular saw
1 Circular saw blade
1 Blade wrench
1 Parallel fence
1 Dust extraction spout
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred
during transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Trigger switch
b. Trigger switch lock-off button
c. Main handle
d. Blade lock
e. End cap
f. Auxiliary handle
g. Bevel adjustment lever
h. Bevel angle adjustment mechanism
i. Base plate
j. Lower blade guard
k. Blade clamping screw
l. Lower guard lever
m. Upper blade guard
INTENDED USE
These heavy-duty circular saws are designed for
professional wood cutting applications. DO NOT
use water feed attachments with this saw. DO NOT
use abrasive wheels or blades. DO NOT use under
wet conditions or in the presence of flammable
liquids or gases.
These heavy-duty saws are professional power
tools. DO NOT let children come into contact with
the tool. Supervision is required when inexperienced
operators use this tool.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of