Outdoor Use - Evolution R11 VAC Li Instrucciones Originales

LABELS & SYMBOLS
WARNING: Do not operate this machine if
warning and/or instruction labels are missing
or damaged. Contact Evolution Power Tools for
replacement labels.
Note: All or some of the following symbols may
appear in the manual or on the product.
SYMBOL DESCRIPTION
V
Min
-1
~ Alternating Current
n Rated Speed
Warning!
Read Instructions
CE Certification
UKCA Certification
(RCM) Regulatory Compliance
Mark for electrical and electronic
equipment. Australian/New Zealand
Standard
TUV SUD Certification
Waste Electrical &
Electronic Equipment
Keep away from heat and open
flames - Do not dispose in fire
Keep away from water - do not
immerse in liquids
Max temperature
DC voltage

OUTDOOR USE

WARNING: For your protection if this tool is to
be used outdoors it should not be exposed to
rain, or used in damp locations. Do not place
the tool on damp surfaces. Use a clean, dry
workbench if available. For added protection
use a residual current device (R.C.D.) that will
interrupt the supply if the leakage current to
earth exceeds 30mA for 30ms. Always check the
operation of the residual current device (R.C.D.)
before using the machine. If an extension cable
is required it must be a suitable type for use
outdoors and so labelled. The manufacturers
Volts
instructions should be followed when using an
extension cable.
Speed
SAFETY INFORMATION
IMPORTANT SAFETY INSTRUCTIONS &
GROUNDING INSTRUCTIONS
When using an electrical appliance, basic
precautions should be always followed,
including the following: READ ALL
INSTRUCTIONS BEFORE USING THIS
APPLIANCE.
NOTE: Read all safety rules carefully before
attempting to operate. Retain for future
reference.
WARNING: Never operate this unit when
flammable materials or vapors are present
because electrical devices produce arcs or
sparks that can cause a fire or explosion.
NEVER LEAVE OPERATING VACUUM
UNATTENDED!
NOTE: This appliance is intended for household
use.
4
www.evolutionpowertools.com