Indicator Lights; Battery Backup - Brandt BCR190SLIM Manual De Instrucciones

Indicator lights

BATTERY BACKUP

The clock and alarm settings can be protected against AC power failure with the battery
for a short period of time. If no backup battery is installed or the power failure is
prolonged, you will need to set the clock and alarm settings again.
SETTING THE CLOCK AND SNOOZE DURATION
1. Place the unit on a flat stable surface.
2. Connect one end of the power adapter into the DC 5V power jack on the rear of the
unit. Plug the power adapter into the mains socket.
 The display will show 0:00.
3. Press SET once.
 The hour digit will flash on the display.
4. While the hour digit is flashing, repeatedly press / until the desired hour
appears.Press SET to confirm.
 Press and hold / for fast setting.
 The minute digits will flash on the display.
5. While the minute digits are flashing, repeatedly press / until the desired minutes
appear. Press SET to confirm.
 Press and hold / for fast setting.
 The hour format will flash on the display.
6. While the hour format is flashing, repeatedly press / to select 12-hour or 24-hour
format. Press SET to confirm.
 The snooze time will flash on the display.
EN-3