EAS ELECTRIC ETH-10VB Manual De Instalación Y Manual De Usuario página 89

INFORMATION
■ WEATHER TEMP. SET have four kinds of curves :1.the curve of
the high temperature setting for heating,2.the curve of the low
temperature setting for heating, 3.the curve of the high temperature
setting for cooling ,4.the curve of the low temperature setting for
cooling.
It only have the curve of the high temperature setting for heating, if
the high temperature is set for heating.
It only have the curve of the low temperature setting for heating, if
the low temperature is set for heating.
It only have the curve of the high temperature setting for cooling, if
the high temperature is set for cooling.
It only have the curve of the low temperature setting for cooling, if the
low temperature is set for cooling.
■ See FOR SERVICEMAN> COOL MODE SETTING and >
HEAT MODE SETTING in installation& ower's manual.
■ The desired temperature (T1S) can't be adjusted, when the
temperature curve is set ON.
■ If you want to use heat mode , you select ''HEAT MODE LOW
TEMP''. If you want to use cool mode, you select ''COOL MODE LOW
TEMP''. You can select the low or high temperature setting for
heating or cooling to see the "Table 1~4". If you select ''ON'', the
following page will appear:
WEATHER TEMP. SET
WEATHER TEMP. SET TYPE:
1 2 3
CONFIRM
OK
Use '◄''、''►''to scroll .Press ''OK'' to select.
■ If the weather TEMP.SET is actived,the desired temperature can not
be adjusted on the interface.Press the ''▼''、''▲'' to adjust the
temperature on home page. The following page will appear:
5:30 08-08-2016 SAT.
Weather temp.set function is
on. Do you want to turn off it?
NO
ENTER
OK
Move to "NO",press "OK" to come back to home page,move to
"YES",press "OK" to reset the WEATHER TEMP. SET.
PRESET TEMPERATURE
PRESET WEATHER
TEMP. TEMP.SET
COOL MODE LOW TEMP.
HEAT MODE LOW TEMP.
ON/OFF
ON/OFF
4 5 6 7 8
SCROLL
YES
SCROLL
ECO
MODE
ON
OFF
SCROLL
6.2.3 ECO MODE
Use ECO MODE is used to save energy.
If ECO mode is activated,
Go to ''MENU'' > ''PRESET TEMPERATURE'' > ''ECO MODE''.
Press ''OK'' . The following page will appear:
PRESET TEMPERATURE
PRESET
TEMP.
HEAT MODE LOW TEMP.
ON/OFF
ON/OFF
Press ''ON/OFF'' . The following page will appear:
ECO MODE SET
ECO MODE SET TYPE:
1 2 3 4
CONFIRM SCROLL
OK
Use '◄''、''►''to scroll .Press ''OK'' to select.
INFORMATION
■ ECO MODE SET have two kinds of curves :1.the curve of the high
temperature setting for heating,2.the curve of the low temperature
setting for heating,
It only have the curve of the high temperature setting for heating, if
the high temperature is set for heating.
It only have the curve of the low temperature setting for heating, if
the low temperature is set for heating.
■ See FOR SERVICEMAN>
HEAT MODE SETTING in installation& ower's manual.
■ The desired temperature (T1S) can't be adjusted, when the ECO
mode is ON.
■ You can selet the low or hige temperature setting for heating to see
the "Table 5~6".
■ If HEAT MODE is ON and ECO TIMER is OFF,the unit run ECO
mode all the time.
■ If HEAT MODE is ON and ECO TIMER is ON,the unit run ECO
mode according to the start time and end time.
6.3 Domestic Hot WATER(DHW)
DHW mode typically consists of the following :
1) DISINFECT 2) FAST DHW
3) TANK HEATER 4) DHW PUMP
6.3.1 Disinfect
The DISINFECT function is used to kill the legionella.In disinfect
function the tank temperature will be reached 65~70℃ forcely the
disinfect temperature is set in FORSERCICEMAN.See DISINFECT in
Installation&Ower's menual.
Go to ''MENU'' > ''DOMESTIC HOT WATER'' > ''DISINFECT''. Press
''OK''. The following page will appear:
9
is displayed on the home page
WEATHER ECO
TEMP.SET MODE
OFF
5 6 7 8
V.2