Quick Guide - boso medicus uno Manual Del Usuario

Quick guide

Insert batteries, ensure correct position-
ing (P. 40)
Connect cuff to monitor (P. 44)
Attach cuff (P. 45)
Start (and stop) a measurement by
pressing the start button (P. 48)
Measured systolic, diastolic and pulse
values are displayed after the measure-
ment is completed (P. 50)
Retrieving values from memory (P. 52):
with the instrument switched off, press
the start button 3 seconds until "M" is
displayed.
This quick guide does not replace the
detailed information on the use and
safety of the blood pressure monitor fea-
tured in the user instructions.
Please be sure therefore to read
the user instructions!
35