Magnat MMS 730 Manual Del Usuario página 18

OPERATIONAL ELEMENTS AND CONNECTIONS - REMOTE CONTROL
1
8
9
4 4
6
5
3 10
7
2
• Before using the remote control the supplied
batteries must be inserted into the battery
compartment located at the rear of the
remote control.
• If the batteries have run out after prolonged
use, please replace them (Type 2 x AAA).
• To prevent causing damage to the remote
control please remove the batteries if the
device is not going to be used for a prolonged
period.
1 POWER
Switches the device on when it is in the standby
mode. If the LED does not illuminate, actuate the
power switch located on the rear of the device.
Conversely the device can be switched from
power operation to the standby mode.
2 INPUT SELECTION
Press several times to scroll through the sources
in the following order:
USB-BT-DAB-FM-NETWORK-NETRADIO-USB
3 MENU/RETURN
NET RADIO mode:
Press and hold to go one step back in the
selection menu.
Calls up the system menu. Use the following
arrow buttons to navigate through the menu
◄◄, ►►, ▲and▼. Press the SELECT button (8)
to confirm the set parameters.
Also see the MMS 730 MENU chapter.
Press and hold to go to the previous setting
menu.
4 SKIP/ARROW/NAVIGATION BUTTONS
USB mode:
Arrow/Skip (backwards)
• Short press: Playback starts at the beginning of
the current track
• 2 short presses: Playback starts at the
beginning of the previous track
• Menu: Navigation / adjustment of parameters.
Arrow/Skip (forwards)
• Short press: Playback starts at the beginning of
the next track
• Menu: Navigation and setting parameters.
FM mode:
• Short press: Changes the reception frequency
in 50 kHz increments (FM)(manual station
setting).
• Press and hold: Searches for the next station
on the selected band (automatic station
setting).
DAB mode:
Selects the next or previous station in the DAB
band.
◄ and ►
Menu: Setting parameters.
5 INFO/SCAN
USB mode:
Display of the ID3 tag (if supported by the music
file):
The 2nd line of the display shows the ID3 tag
information. Press the INFO button to display
further information.
For MP3 and WMA files, the file name of the
current track is also displayed.
18
FM mode (INFO):
One short press enables the retrieval of RDS
information (where supported by the station).
Further details about the RDS station information
can be found in the "RDS functions of the tuner"
section.
DAB mode (SCAN):
Retrieving DAB station information (where
supported by the station).
Further details about the DAB station information
can be found in the "DAB functions of the tuner"
section.
Press and hold to start the automatic
station search for DAB.
Bluetooth operation:
The display shows the device ID of the paired
device, the data rate and the ID3 tag information
of the current track.
Press the INFO button to display further ID3 tag
information:
6 MUTE
Switches the sound on and off.
7 +/- BUTTONS
The +/- buttons can be used to scroll through
preset stations (DAB+, FM and NETRADIO). See
also 10 FAV.