Initial Operation; The Mms 730'S Menu; Network Set-Up - Magnat MMS 730 Manual Del Usuario

INITIAL OPERATION

• Place the MMS 730 on a flat surface. Observe the relevant clearance gaps specified under "Important
safety instructions".
Important: Do not place any objects (magazines, CD/record sleeves, etc.) on the device. The ventilation
openings on the top of the device must remain unobstructed at all times!
• Connect the MMS 730 to your receiver via a coaxial/optical or analogue output.
• Connect the DAB/FM antenna to the antenna connection point at the rear of the device. For later
operation, the position of the antenna should then be determined according to where the best
reception is. The end of the antenna should then be secured in the appropriate position, e.g. using a
drawing pin.
Reception can be improved by a suitable indoor or outdoor household antenna if the reception is not
so good.
• Connect the mains cable supplied to the rear of the unit and then insert the other end into a 230 V
socket.
• First activate the power switch at the back; the device is now in standby mode.
• Then switch on the device using the remote control or via the ON/STBY key at the front.
• Select your desired audio source using the input selector button (A-4).

THE MMS 730'S MENU

Other parameters can easily be set via the menu.
• The menu is accessed via the MENU key on the remote control or by pressing the volume MENU on the
front of the unit.
• Navigation within the menu and changing the settings is done by using the arrow keys ◄◄
►► on the remote control or activating the SKIP buttons on the device.
• Confirmation of the individual menu items using the PLAY button on the remote control or by pressing
the PLAY/PAUSE/MENU button on the device..
The following settings are possible:
• System information:
Select SYSTEM INFO in the menu. The ◄◄ and ►► keys can be used to display the individual firmware
versions of the device for service purposes.
• Network Wizard
• Upgrade
Available device updates including descriptions are offered on our homepage.
• FACTORY reset:
The basic settings are restored via the FACTORY RESET menu item (delete all station memories, auto
standby on, network settings deleted, saved NETRADIO favourites lists are not deleted).
• Auto standby function:
The unit has an auto standby function that automatically switches the device to standby mode around 3
1/2 hours after the last time it was operated (via the controls on the unit or via the remote control). This
function implements an EU energy-saving regulation (1275/2008 EC), reducing power consumption if
the device is accidentally left turned on after use.
Select APO SETTING in the menu. The function can now be activated or deactivated. When leaving the
factory, the function is activated.
• Exit:
You can leave the menu via EXIT.

NETWORK SET-UP

CONNECTION TO THE NETWORK VIA LAN (CABLE)::
Connect the MMS 730 to your LAN network. Use a LAN cable (not included) for this. The MMS 730
automatically obtains a network address from your router within approx. 5 minutes and can then be used.
CONNECTION TO THE NETWORK VIA W-LAN WIRELESS)::
You have two options for connecting the MMS 730 to your WiFi network:
1. Network setup with the NETWORK WIZARD:
• Select NETWORK WIZARD in the MMS 730 menu.
• The W-LAN search starts automatically, with SCANNING shown in the display.
• When the search is finished, use the SKIP buttons (remote control (4) or the SKIP button
(device (8)) to show the existing networks in the display one after the other.
• Press the PLAY button (remote control (8)) or the MENU button (device (10)) to select the
desired network
• Then enter the WiFi password:
Navigate through the alphabet and numbers using the SKIP buttons or the PLAY button.
Confirm the individual password digits with the SELECT button (remote control (8)) or
the MENU button (device (10)). The last digit entered can be deleted using the selection box
,
• When you have finished entering the complete password, confirm it with the selection field.
The MMS 730 will now connect to your WiFi network. After successful connection, CONNECTED is shown
in the display.
• If the connection fails, CONNECT FAIL is displayed. In that case, please check the password and enter
again.
2. Network setup with the MAGNAT AUDIO STREAM app:
• Download the MAGNAT AUDIO STREAM app from the Apple Store or Google Play Store and install it on
your tablet/mobile phone
• When started, the app searches for available devices.
• When installing for the first time, select "Add device". Then select MAGNAT.
• Follow the instructions on the next page of the app and switch to the W-LAN settings of your mobile device.
Select the MMS730_XXXX network.
• After successful connection, switch back to the MAGNAT AUDIO STREAM app. This then connects to the
MMS 730 and guides you through the further installation process.
• Alternatively, other "MÜZO"-based apps can also be used.
20
.
.