Before Use; Product Assembly - cecotec FORCECLIMA 9050 Manual De Instrucciones

ENGLISH

3. BEFORE USE

WARNING: before using the mobile air conditioner, keep it in an upright position for at least
two hours.
The air conditioner can be easily moved around the room. Always move and transport it in an
upright position and install it on a flat and stable surface. Do not install the air conditioner in
bathrooms or wet environments.

4. PRODUCT ASSEMBLY

Img. 1
1. Screw the exhaust pipe adapter to one of the exhaust pipe's end by turning it clockwise.
2. Screw the window adapter to the other end of the exhaust pipe.
3. Introduce the butterfly screw in the window-sealing support's hole.
4. Slide the window-sealing support through the window-sealing support's inner part,
making sure the screw is introduced in the support adjustment's guide.
5. Fix the screw with its butterfly and adjust it to the desired measure.
6. Use the screws provided to fix the window adapter to the window-sealing support's hole.
7. Install the whole window-sealing unit vertically or horizontally, depending on the type of
window and adjust it to the window's measure.
8. Close the window and make sure that the window-sealing unit fits properly.
9. Youtube link: https://youtu.be/8aj8BcB2bKA
WARNING:
• The flat end of the exhaust pipe joints must be fitted into place.
• Do not deform or turn the pipe excessively (over 45º). Keep the exhaust pipe's inlet and
outlet clear.
28 FORCECLIMA 9050
Img. 2 Img. 3